1. HOME
  2. ブログ
  3. 最新記事
  4. How to Create Your Own Dog Mask – The Basics

BLOG

ブログ

最新記事

How to Create Your Own Dog Mask – The Basics

In this report we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and techniques which you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the garden and other regions of the house, you will need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup that will look a little scary at first, but it’s actually quite straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you’ll have to cut around the edge of the mask so you get something which looks like a cone. The main thing here is to be realistic with what kind of paper plate which you’re using.

Then you will need to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so that you can ensure that nothing will leak once you put the mask on. Be sure that the edges are cut so the edges aren’t sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask , so you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.

Don’t fret too much about the paint getting stuck into mask dog your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you’re done, so you don’t end up with smudges or smears on your dog.

Then it is time to paste the mask onto your dog’s head. First you will need to make sure that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you may begin to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the base of the mask and then fold it over. Make certain it’s quite strong and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you have the mask snugged securely onto the face of your dog. Don’t make the folds too large or else it might look messy. As soon as you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask onto the dog. Be sure that the ears are flat and make sure that it is not too short or long as this can cause some problems with the mask slipping off the dog’s face.

If you’re using a dog mask as your pet security, you’ll have to do some sanding to make sure that it is safe on your dog. You can do this by sanding off any excess paper which might have been eliminated from your mask.

  1. この記事へのコメントはありません。

  1. この記事へのトラックバックはありません。

関連記事